Cutting the bar stock
Boring the chamber
Boring the exit
Lathe cleanup cuts
Drilling chamber cooling holes
Milling chamber slots
Cutting o-ring grooves
Drilling converging cooling holes
Drilling diverging cooling holes
Milling exit slots
Complete chamber
Blank for injector cap
Top of injector cap
Bottom of injector cap
Finished injector cap
Outside contour of injector
Drilling injector holes
Milling injector face cooling slots
Top of finished injector
Bottom of finished injector
Injector v4
Injector v4 w/Igniter v6 assy (top)
Injector v4 w/Igniter v6 assy (bottom)
Injector v5
Injector v5 LOX cap
|
